Irish Grind Bowl Gouge Docs

  • document

    THE TOOL SHOP Sharpen Learn to 2 Progressively

    Sharpening the spindle roughing gouge The spindle roughing gouge is ... the Irish grind. Although it looks formidable with such a long edge, ... sharpen a bowl gouge I recommend the transition grind for new bowl turners. You work the

  • document

    Demo or Class: The Ellsworth Signature Gouge

    grind (Irish grind). See John Jordan segment on AAW Sharpening DVD. 5/ 8” is available from www.packardwoodworks.com Use for roughing out. ... Turn the outside of bowl. 4a. Use Ellsworth gouge with roughing cut to make it round. 4b.

  • document

    Burl - Heirloom Bowls

    www.woodturner.org 00 For this project, you’ll need: • 1/2" and 3/8" Irish-grind bowl gouges • 1/2" x /8" diamond-shaped shear scraper • 1/2" shallow-flute spindle gouge

  • document

    Recommended Tool Grinds for the Tormek Wet Sharpening System

    As a proud owner of a Tormek Sharpening System, we know you appreciate the value of a razor-sharp cutting edge on your woodworking tools. With the Turning Tool ... Irish Bowl Gouge This grind uses the same settings used on the standard bowl gouge.

  • document

    WOLVERINE GGRINDING JJIG IINSTRUCTIONS - Rockler

    WOLVERINE GGRINDING JJIG IINSTRUCTIONS Contents of Package spacer block in line Setting Up - Mounting the Bases 6-1/4 6-1/2 Speed handle ... fingernail grind! bowl gouge grind! side or Irish grind. Side Grind (Irish Grind) While attending many wood shows and symposiums, designers at .

  • document

    Setting-Up Your Woodturning Work Station – Part 1:

    The grind most people recommend for a beginner is often called an Irish or Ellsworth grind. ... a bowl gouge of this size with this grind will get you started on the road to turning bowls and make your turning more enjoyable. American Association of Woodturners, Woodturning Fundamentals 1 ...

  • document

    Translucent Bowls - Eric Lofstrom

    Translucent VS. Traditional Bowl Turning– What‟s the difference? 1. ... Fingernail Grind Bowl Gouge Traditional Grind Bowl Gouge ee ORCE ORCE. My Bowl Gouges: (approx. angles) Irish Grind- used to remove nearly all wood inside & out, shear cut &

  • document

    Demo of the Month

    Again using only the Irish grind bowl gouge he hollowed the inside leaving only a 1/8” thickness in the bowl's walls then the inside of the bowl was sanded to 320 grit. The piece was then placed in a Longworth chuck to remove the tenon from the bottom.

  • document

    Finger Lakes Woodturners

    duced the Irish Side Grind Bowl Gouge to David Ellsworth – who eventually promoted its use throughout American woodturning. FLWT Board of Directors Liam is known for a variety of turned work including bowls, hollow

  • document

    60º ¾” to 1” - Geiger's Solutions

    Five Cuts with a Side-Ground Bowl Gouge By: Don Geiger ... or an Irish grind. The fifth cut includes instructions on using a micro-bevel gouge with a 70° bevel on the tip and one or more relief grinds. For information on accurately producing these grinds, visit:

  • document

    Gouge Jig SVD-185 - Rockler

    72 Gouge Jig SVD-185 Grinding direction: Away from the edge. Design The jig comprises a tool holder (1) which runs in a sleeve (2). The tool is aligned with a disc

  • document

    Message from the President - Utah Association of Woodturners

    3/8" Bowl Gouge sharpened to a long finger-nail (Irish) grind, 1/4" Spindle Gouge, 3/4" Round-Nose Scraper with Burr Removed, Morse Taper Screw Chuck, Barracuda 3 Scroll Chuck (or other small chuck), Sandpaper, Curved Surgical Clamps (to hold sandpa-

  • document

    Katherine Kowalski Grinding, Sharpening, & Chips

    Grinding, Sharpening, & Chips ... referred to as the “Irish Grind,” and popularized by David Ellsworth). ... Pointy Spindle Gouge This is a grind popularized by Cindy Drozda, and is extremely useful for creating small details on

  • document

    TURNING WOOD BOWLS - Jim Rodgers' Designs in Wood

    o Bowl turning, starting with out‐of‐balance stock may require the speed to be reduced ... and Irish grinds. The length of the side grind, whether ... Many times the bowl gouge cannot complete the interior cuts near the bowl bottom center

  • document

    Don Geiger- Biography - Classic City Woodturners

    Don Geiger- Biography ... • Sharpening a deep- fluted bowl gouge with an Irish/Ellsworth grind. ... • Five cuts using a bowl gouge, how to prevent catches and how to obtain smoother surfaces that are more easily sanded. • When, ...

  • document

    gouge Jig SVd-185

    72 gouge Jig SVd-185 Grinding direction: Away from the edge. Design The jig comprises a tool holder (1) which runs in a sleeve (2). The tool is aligned with a disc

  • document

    G H Package Contents F

    A 60° Ellsworth or Irish Grind on a deep-fluted bowl gouge 60º ¾” to 1” Spindle Gouges with a 40° bevel Angle selection rod position: ORANGE

  • document

    Finger Lakes Woodturners I

    The swept back bowl gouge, aka the David Ellsworth grind, the Irish grind, the Jameson grind (all slight variations on the same theme), can be used to make seven different cuts. One, the scraping cut, is good for beginners, but

  • document

    Shavings - Mid Minnesota Association of Woodturners

    classic 'Irish grind' bowl gouge. His vast knowledge and experience plus his natural sense of Irish humor has made him one of the top demonstrators since he first came to America back in the mid- í õ ô ìs." Twenty-one members responded to our initial email blast.

  • document

    Regular Monthly Meeting Message from the President

    done, he takes his “big bowl gouge”, a ¾” bowl gouge with a swept back Irish grind to take out the rest of the inside. As you ap-proach the natural edge, make sure the flute is facing horizontal, or the direction of your cut so it won’t “skate” and ruin the edge.

  • document

    Search Go Home Store Locator Catalog Sales Flyer CLASSES ...

    Tools Required: One Each – Bowl Gouge, Spindle Gouge & Skew To Be Sharpened Correct sharpening skills are crucial to success at woodturning. Instruc- ... nose angles for an Irish grind, Ellsworth grind, fingernail grind for bowl gouges and spindle gouges; correct sharpen-

  • document

    Montgomery County Woodturners

    the author of the classic 'Irish grind' bowl gouge. His vast knowledge and experience, plus his natural sense of Irish humor, have made him one of the top demonstrators since he first came to America back in the mid-1980s."

  • document

    Gouge Jig SVD-185 - Tormek

    GoUGE JIG SVD-185 69 Turning Gouges Bowl and Spindle Gouges Note the settings on the Profile Label and put it in on the ferrule. A set of labels comes with the jig.

  • document

    project half log bowl A4 - Galloway Woodturners

    It is safest to use a gouge ground with some degree of sweep back to the edge – called variously the Irish Grind, ... If necessary level off the top surface with the bowl gouge, cutting on centre level from outside to centre. 14.

  • document

    How to turn a crotch form B y Dinyar B. Chavda (July 2003)

    natural -edged bowl, like the one shown in CrotchBowl, or ... I use either a regular bowl gouge or one of my Ellsworth/Irish Grind -type gouges. The piece is starting to take shape in Fig 5, although the top ... If I had gone with my original design of an open bowl, I would use a bowl gouge to

  • document

    Sharpening for Woodturners - Leland Studios

    A good idea for someone who would like to sharpen a side ground gouge (Irish Grind David Ellsworth ... mounted in a lathe to test the tools before and after sharpening to give the students a better understanding of how ... of tool (scrapers, spindle roughing gouge, bowl & spindle ...

  • document

    New Mexico Wood Turners; Vol. 11 Issue 5 May 2010 High Desert ...

    Bill passed around a double-ended One-Way bowl gouge that is V-4, or 4% Vanadium. He also showed us some ¼” round HSS rod for tools available through ... designs, the English grind, which has a 45 Titanium Nitrite as a coating on HSS helps lubricate the surface and toughens the steel.

  • document

    GCWA Newsletter

    Steve Russell shows how a side-grind (also called an Irish Grind) can greatly increase the versatility of a bowl gouge. Grinding jigs can help achieve this grind, but Steve will show free-hand techniques. YoYo’s – Hands On

  • document

    MWT december 2008 - Maine Woodturners

    contribution to MWT in the area of communications via the website and newsletter. Welcome aboard, Chuck! New MWT Member Profile ... as David applied a bowl gouge with an Irish grind on the center of the bowl and power cut his way to the edge.

  • document

    toolday 2010 order form - MinnDakWoodturners

    Bowl gouge jig $15 Holds bowl gouge for sharpening (Irish / Ellsworth grind) laser pointer QTY Cost Description wall thickness system $60 Helps you determine where your cutter is in relation to the wall thickness of your hollow vessels.

  • document

    Several of our members will give “mini demos”

    Placed between centers the birch is roughed out with a bowl gouge (Irish grind) because a roughing gouge sends the chips, bark, dirt and grit right back into your face and body making a mess. The bowl gouge is placed at 45 degrees, rubbing the bevel and moving from left to right

  • document

    INSTRUCTIONS FOR GRINDING 291 Griffith Road, Stratford, ON ...

    fingernail grind bowl gouge grind side or Irish grind Side Grind (Irish Grind) While attending many wood shows and symposiums, designers ... Can be purchased as an accessory to the WOLVERINE GRINDING JIG or as a Complete System. The only difference

  • document

    Palmetto Woodturner ©

    Charleston, SC. She came to the art of woodturning fairly recently. ... will be using the same 40/40 grind on a bowl gouge that she was using for the spindle. ... 2012 American Asso ciation of Woo dturners National Symposium in San Jose and at the Irish Woo dturnin g

  • document

    Echos From the “BAT” Baltimore Area Turners Cave

    He brought the Irish Grind to the US. David Ellsworth was his first convert, he said. Lately, he has been making ... After roughing out the center bowl he used his bowl gouge held almost upside down to attain a good finish. He showed a spindle

  • document

    Basic Tool Groups - N.J. Woodturners

    Bowl Tools Bowl Gouge Known by its deep flute, ... Many grinds used at turners individual preference – Irish, Ellsworth, Mahoney, Traditional, Key, Traditional grind is very straight and best used for cutting straight across bottoms. Platform ground straight across. Swept back wings are best ...

  • document

    Galway chapter NEWS

    we were all comfortable using a bowl gouge with the “Irish Grind” and David’s hollowing tool. Whether or not we ever put into practice what was demonstrated that day is another question but we will no longer wonder “how did he do that”?

  • document

    Segmented turning by Ron Schiffner - MinnDakWoodturners

    Bowl gouge jig $10 Holds bowl gouge for sharpening (Irish / Ellsworth grind) laser pointer QTY Cost Description wall thickness system $50 helps you determine where your cutter is in relation to the wall thickness of your hollow vessels

  • document

    Galwa Chapter NEWS

    IRISH WOODTURNERS GUILD Galwa Chapter NEW S Contact Information Chairman: Sean Clancy Editorial Hon. Secretary: Tim Lydon Hon ... ELLESWORTH GRIND The Ellsworth grind on a bowl gouge is quiet difficult to master freehand, but Eddie showed

  • document

    Woodturning Safety Rules

    Produced by JL Rodgers, Inc – 236 Briar Drive – Martinez, CA 94553 © All right reserved, 2007 Page 1 Woodturning Safety Rules . 1. Know Your Equipment and Yourself.

  • document

    Feb 2013 THE CHIPFLYER

    the 6-8 inch grinder and the sander/grinder.The grinders give a hollow grind to the longer tool bevels on spindle and bowl gouges, where as the sander/grinder imparts a flat bevel. There have been various discussions about ...

  • document

    What’s My Name?

    Irish Woodturners’ Guild 2 Seminar Challenge 2 ... (The Laird) to grind, burn, scorch, hack and gouge an oak bowl blank for at least 1 hour. Break for tea and biscuits, ... Use normal bowl gouge to remove centre of bowl blank and use abrasive paper from 40 grit upwards to pro-

  • document

    Echos From the “BAT” Baltimore Area Turners Cave

    troduction of the Irish (swept back) grind of gouges; he prefers the English (not swept back) grind for bowl turning. He eschews the skew and uses a ... gouge hollows the bowl Next was an oil lamp. A 1 ½” hole was drilled in the Red-

  • document

    THE CHIP FLYER

    Oct 21 Basic Bowl Turning demo by Doug Newlove ... you made, one with that special grind or simply come with your questions. ... incorporate the Ellsworth Gouge as there has been quite a bit of informal discussion about it in recent

  • document

    North Carolina WOODTURNER - NC Woodturners Home Page

    We have several members who do check out books so I have purchased Great Book of Woodburning by Lora S. Irish ... parting tool, roughing gouge, bowl gouge, spindle gouge or even a skew ... starting a center hole using the spindle gouge with a fingernail grind. Drill hole with gouge to ...

  • document

    West Midlands Woodturners

    Website: http://www.wmwoodturners.org.uk Page 3 ... Swedish turner, now resident in America whom he met at an Irish seminar, and who en- ... mainly a ½ inch bowl gouge with a swept back grind, a 3/8 inch bowl gouge, a 3/8 inch